Select your location:

Country

Select your language:

Our first pressure vessel, built and hydrotested
  1. Home
  2. Projects
  3. Our first pressure vessel, built and hydrotested
Case study · Process equipment

Our first pressure vessel, built and hydrotested.

The first pressure vessel made in our works: rolled, welded, inspected with the client’s engineers on the shop floor, and proved by a hydrostatic test.

A first
Pressure vessel made in our works
Proof
Hydrostatic test passed
For
A process project in Malaysia
Status
Completed
The project

A pressure vessel is judged by one test. Every seam has to hold water under pressure, so rolling, fit-up and welding have to be right long before the test day.

What we made
  • Shell rolling and fit-up
  • Seam welding
  • Stage inspection with the client’s engineers
  • Hydrostatic test
How we built it

The vessel was manufactured, inspected and hydrotested successfully. It is the first of its kind from our works.

Knock-out drumsLiquid seal drums

More case studies
Ports · Paradip Port, Odisha Accropode breakwater moulds for a jetty at Paradip 2 to 6 m³ High-speed rail · Mumbai-Ahmedabad Moulds and steel for the Mumbai-Ahmedabad high-speed rail 500+ cast from our moulds Mining · Tanzania Crusher and screening building for the North Mara gold mine 2,000+ T
Start a project

A project like this?

Send the drawings and an engineer will tell you how we would build it.

Send us a drawing