
- Home
- Custom Fabrication
- Chemical Process Tanks
Chemical process tank fabrication
Welded steel and stainless tanks for chemical, refinery and treatment processes, with nozzles, manholes, ladders and platforms.
Chemical Process Tanks, made in India.
Process tanks hold, mix and settle liquids in a chemical plant. They are rolled shells with heads or flat bottoms, nozzles, manholes and internals, and the welds and finish must suit what they hold.
Allmarc fabricates to the client’s drawing at our 4 plants in Kanbha, Ahmedabad, with cutting, forming, welding, machining, blasting and painting under one roof.
- Vertical and horizontal tanks
- Carbon steel and stainless steel shells
- Nozzles, manholes and internals
- Agitator mounts
- Ladders, platforms and supports
- Hydrotesting and coating
We fabricate knock-out drums and liquid seal drums for flare systems, and hydrotested our first pressure vessel in house.
The machines it runs on.
- Rolls plate up to 40 mm
- Hypertherm XPR 460, first in India
- 5 oxy-fuel torches
- Qualified welders, including 6G
- Dust collection
- 15 m paint booth for long sections
Industries and related work.
Welded and bolted steel silos, hoppers and support structures for cement, minerals, grain, biomass and slurry.
Waste Water Treatment Plant AugersScrew augers, conveyors and troughs for sludge, screenings and grit in waste water treatment plants.
Also in this group: Large Diameter Welded Circular Structures, Shredders, Beam Guiders, Chimney Stacks, Steam Ducts.
Chemical Process Tanks, answered.
Do you fabricate stainless steel tanks?
Yes, in carbon steel and stainless steel, with welding procedures for each.
Are tanks tested before dispatch?
Tanks are hydrotested or leak tested as the specification requires, then blasted and coated in our shop.
Do you do hydrotests in house?
Yes. We hydrotested our first pressure vessel in our works, for a process project in Malaysia, and test tanks before dispatch to the client’s plan.
Can you roll tank shells in house?
Yes. Shells are rolled on our plate rolls, which take plate up to 40 mm, and nozzles and manholes are cut and fitted in the shop.
Do you fit internals and agitator mounts?
Yes. Baffles, internals, agitator mounts, ladders, platforms and supports are fabricated and fitted with the shell.
Do you prepare weld procedures for each job?
Yes. We write and qualify welding procedures (WPS) for the materials and joints, as we did for our first pressure-part project, a flare riser with liquid seal.
What finish can tanks have?
Carbon steel tanks are blasted to Sa 2.5 and painted or lined to your system. Stainless tanks are cleaned and passivated to your specification.
How are tanks shipped overseas?
Tanks are braced inside, nozzles are blanked and capped, and they travel on saddles secured for sea freight. We have shipped to the USA, Malaysia and Australia.
Need chemical process tanks? Send the drawing.
Tell us the quantity, material and delivery; an engineer will reply with how we would make it.