What is new at Allmarc.

From our works3 min read Our renewables range in 3D: solar, wind, hydro, hydrogen and carbon capture37 products from our renewables catalogue, with the steel for each modelled and taken apart: tables and trackers, wind tower internals and offshore foundations, penstocks, radial gates, electrolyser frames and more. In the works2 min read Allmarc Scafform turns to chassis for mobile crushers and screensOne bay stays with scaffolding and formwork; about 60% of the plant moves to light, precise, repeat work at a fixed monthly rate: chassis and frames for mobile crushers, screens and stackers, and precision parts for rail-track maintenance machines. Projects3 min read 2,200 T of enclosed ground flares, 4 chambers 46 m high, for the Louisiana LNG project, USARolled shell panels, drilled ring girders and internal supports, trial-assembled in our 30 m bay 4 levels at a time, then insulated, coated and packed for the voyage. From our works2 min read Our whole range in 3D: an onshore plant and an offshore field, connected53 products, assembled from the same models as our product pages. Follow the oil, gas and flare lines from the well to the tanker, and see how Allmarc makes each part. In the works2 min read Yoke rings and jack-house bases for jack-up barges, in our worksThick rings braced round while they are welded out, pin-box openings cut to jig, and leg sections rolled from plate: the steel that lets a construction barge climb its own legs. Projects2 min read Elevated flare stacks with liquid seals: one delivered, a second in build for North AfricaStepped risers in flanged sections, seal drums and the steel round them, fabricated to the licensor’s drawings. Milestones2 min read Our first enclosed ground flare: a 35 m, 200 T chamber, delivered in 3 monthsFrom order to delivery in 3 months, and the start of a flare business that has since exported 2,400 T. Milestones1 min read Allmarc AM InfraCon opens in November: 2,000 T a month of stainless steel flyover girdersAllmarc AM InfraCon LLP, our JV with Aakshya Infra, is a 1.5 lakh sq ft shed. For 3 years it will make stainless steel girders, piers and pier caps for BMC flyovers in Mumbai, a first for India. It takes our capacity to about 6,000 T a month. In the works1 min read Grip-Strut: single-piece anti-slip planks up to 8 m, made on our own linePunched, embossed, edge-formed and sheared in one pass. Tested to R13, and 40% lighter than bar grating. In the works2 min read Packed to cross an ocean: how insulated flare panels reach site undamagedExport packing frames we designed ourselves, marked course by course so the chamber is rebuilt on site exactly as it stood in our bay. Oil & gas13 Sept 20266 min read Zeeco EGF: engineering global energy infrastructureFour totally enclosed dry ground flare systems for the Louisiana LNG development in the USA: about 550 T each, 20 m in diameter and 46 m high, 2,200 T in all. Precast & moulds11 Sept 20265 min read Accropode: precision engineering for stronger coastlinesCLI-approved Accropode mould systems for ITD Cementation, designed, made and delivered in one month: moulds for concrete armour units of 2 to 16 m³.